4
INSTALLATION
DRUM
INSTALLATION -
3
①
②
③
④
⑤
HiHat Installation
1. Open HiHat Stand Legs
①
to suitable position and make it stand
firm.
2. Insert Thin Rod
②
into screw thread on the Bottom Stand according
to dashed line here, and rotate it clockwise to fasten it.
3. Place Hollow Rod
③
outside Rod
②
, and insert it into Bottom Stand.
4. Insert HiHat Cymbal Tray
④
onto Thin Rod
②
and place it above
Hollow Rod
③
5. Adjust Hollow Rod
③
to suitable height and fasten it. Insert HiHat
Cymbal onto Thin Rod
②
. Make sure there is enough space
between the Cymbal and Tray
④
, and then fasten the screw on
Cymbal.
Note:
If there is not enough space between Cymbal and
Tray
④
, the HiHat control function will be very short in range or even
not responding.