12
INSTALLATION
INSTALLATION
If You Have a Satellite Battery Pack...
Install Batteries into the Battery Wand
■
See the instructions on the previous page.
Mount the Satellite Battery Pack
■
Decide where you want to attach the wall mount bracket. A satellite battery pack may be mounted in any orientation.
■
Mark the screw holes.
■
Drill the screw holes using a
3
/
32
” drill bit.
■
Remove the backing from the double-sided tape. Press the bracket into place.
■
Attach the bracket using the screws provided.
■
Position the battery wand so the power cable is easily connected to the socket.
■
Snap the battery wand into the bracket.
■
Install the battery wand cover with the slot aligned to the socket in the battery wand.
■
Plug the power cable from the shade into the extension cable.
■
Plug the other end of the extension cableinto the socket in the battery wand.
■
Secure the power supply cable using wire retainers (not supplied). If hiding the cable
behind the shade, make sure it does not impede the operation of the shade.
Proceed to “Testing the Shade” on page 14.
If You Have a DC Power Supply...
Connect the Power Supply
■
Plug the power cable from the shade into the extension cable.
■
Plug the other end of the extension cable into the DC power supply.
■
Plug the DC power supply into a standard outlet.
■
Secure the power supply cable using wire retainers (not supplied). If hiding the cable
behind the shade, make sure it does not impede the operation of the shade.
■
Space the wire retainers approximately 15” apart along the power supply cable, as
shown.
WARNING:
Keep cables and small parts out of the reach of children. They can
wrap cables around their necks and
STRANGLE
. They can also put small parts in
their mouths and
CHOKE
.
WARNING:
Electric shock and/or a fire hazard may occur, if not properly
installed.
Proceed to “Testing the Shade” on page 14.
Wall Mount Bracket
Socket
Battery Wand Cover
Socket
Slot
Battery Wand Cover
Extension
Cable
Power Cable
from Shade
Power Cable
from Shade
Extension
Cable
DC
Power
Supply
15"
Maximum
Wire Retainers
