7
INSTALLATION
CHILD SAFETY
Deep Cleaning
Use the following steps for deep cleaning:
■
Immerse the shade in a basin or bathtub filled with warm water and a mild detergent.
■
Rinse with clean water.
■
Before removing from the basin or bathtub, fully raise the shade and tilt it to allow excess water to drain off.
■
Reinstall damp shade, lower it, and let it dry completely.
CAUTION:
Do not immerse Opaque fabrics.
CAUTION:
Do not immerse the headrail or any fabric-wrapped rail.
Ultrasonic Cleaning
Standard shades, except those made with Opaque Lining, can be ultrasonically cleaned by a professional.
■
Specify that a mild detergent be used.
CAUTION:
Never immerse the headrail or any fabric-wrapped rail in the solution.
■
Dry the shade completely in the lowered position.
CAUTION:
Do not ultrasonically clean Opaque fabrics.
■
Window Blind Cord Can STRANGLE Your Child.
■
Children can climb furniture to reach cords. Move crib and furniture away.
■
Keep all cords out of children’s reach.
Cord Loop Shades
■
Attach the cord tensioner on the cord loop to the wall or window casement. See “Mount and Attach
the Cord Tensioner” on page 4. This can prevent children from pulling cord loops around their
necks.
■
Kirsch
®
provides a cord tensioner installation kit with instructions for attaching the cord tensioner.
For the shade to operate properly, the cord tensioner must be correctly mounted and secured.
■
Fasteners provided in this kit may not be appropriate for all mounting surfaces. Use appropriate
anchors for the mounting surface conditions.
■
Only Kirsch supplied cord tensioners and hardware should be used. Replacement parts may be
obtained by contacting Kirsch Consumer Support at 844-KIRSCH2 (844-547-7242).
WARNING
For more safety information, call 844-547-7242.
NOTE:
The warning labels on the bottom rails of corded window coverings contain important safety information. In
accordance with industry safety standards, the warning labels are designed to be permanent and must not be removed.
CHILD SAFETY
