KIRLOSKAR KMW MIN T 8 DLX, Operator'S Manual

Page: 16 / 69

6.3 Air Cleaner Oil Change & Cleaning Procedure
Step 1 - Loosen air filter clamps, separate oil bath bowl & filter element.
Step 2 - Dispose old oil from bowl & wipe out dust particles from bowl by use of clean cloth.
Step 3 - Fill new recommended oil into the oil bath bowl.
Step 4 - Clean filter elements with diesel or kerosene & reinstall. If filter elements are
damaged, replace with new one.
Step 5 - Reinstall oil bath bowl & tighten filter bowl clamps.
Note: Operating engine with dusty oil or damaged filter element causes engine
performance.
6.4 Transmission Oil Change Procedure
x
Place MINT on flat surface & keep oil container
tray at bottom of gear box to collect old oil.
• Drain out transmission oil by removing
transmission drain plug and oil filer cap
• After complete oil drain out, reinstall the drain
plug securely & fill recommended transmission
oil into the gear box. Use funnel to avoid oil
spilling.
• Use oil filler gun or oil applicator to avoid oil
spilling.
• After complete of process, reinstall oil filler
cap.
• To check transmission oil level, remove oil level filler cap provided at top side of gear box assy.
• When it drops near the low mark add oil, but do not fill above the full mark.
• Put the dipstick back into the filler hole and twist the stick around so the flat side is toward the
cente r of the transmission gearbox
6.5 Lubrication Specification Chart
USE ONLY KOEL RECOMMENDED OIL & LUBICANTS
Lubricants Type Specifications Quantity Replacement
Engine Oil SAE 15W-40, CF-4 1.65 lit Every Service
Transmission Oil SAE 80W-90, GL-4 2.2 lit 200 Hrs or 5 months
Air Cleaner SAE 15W-40, CF-4 15-20 ml Every Service
.,5/26.$52,/(1*,1(6/,0,7('
$.LUORVNDU*URXS&RPSDQ\