KIRLOSKAR i-HT, Instruction On Installation, Operation And Maintenance

Page: 7 / 50

IOM/i_HT Issue Date: 26/06/2009
Page 7 of 50
Last Revision:26/10/2009
Pump set must be lifted from the lifting holes provided on the pump by using suitable
four chain lifting equipment.
2.6.3: Storage.
2.6.3.1: Temporary storage for up to six weeks .
If the pump unit is not be used immediately it should be stored carefully in a horizontal
position, in a sheltered, dry location. Additional rust preventive should be applied to all
unpainted carbon steel or cast iron parts, and should not be removed until final
installation.
2.6.3.2: Long Term Storage.
If the pump is not to be installed and operated soon after arrival, store it in a clean,
dry place, having slow, moderate changes in ambient temperature. Step should be taken
to protect the pump from moisture, dust, dirt, and foreign bodies. It is recommended that
the following procedure is taken:-
a) Ensure that the bearings are packed with the recommended grease, to prevent
moisture from entering around the shaft.