BPC955V0 User Manual
EMS955V0 AMF CONTROLLER1.doc
Page 18 of 19
8/06/2011
Message
Function description
Oil Temperature High
The oil temperature went above the alarm setpoint while the engine was
running.
Check for over loading. Check cooling air flows, check coolant and oil
level.
Engine Temp High
The engine temperature went above the alarm setpoint while the engine
was running.
Check for over loading. Check cooling air flows, Check coolant level.
Canopy Temp High
The Canopy Temperature went above the alarm setpoint.
Check cooling air flows. Check for overloading.
Fuel Level Low
The Fuel Level is below the alarm setpoint.
The engine is stopped to prevent air and dirt infiltration to the engine.
Replenish the fuel.
Battery Voltage High
The battery voltage went above the setpoint.
High battery voltage usually indicates that the battery charging alternator
has failed and it is producing a voltage which might damage the battery,
control relays or the controller.
Engine shutdown is recommended to minimise the risk of damage and fire.
Under Speed
The engine was running below the under speed setpoint.
Check for overloading. Check fuel system.
Over Speed
The engine was running above the setpoint.
Check governor system. Check power takeoff couplings.
Hirev Alarm
The speed signal indicates the engine is grossly over speed.
Check Governor system.
Water Level Low
The radiator water level is below the required level.
The water level needs topping up.
Start Fail
The engine has failed to start.
Check Fuel supply, check battery condition, check air filters.
Stop Fail
The engine has failed to stop.
Check stop solenoid, check rack operation.
Oil-P Fault
The Oil Pressure sensor system is not functioning as expected.
Check oil pressure sensor and associated wiring.
Oil-T Fault
The Oil Temperature sensor system is not functioning as expected.
Check oil temperature sensor and associated wiring.
Eng-T Fault
The Engine Temperature Sensor is not functioning as expected.
Check engine temperature sensor and associated wiring.
Can-T Fault
The Canopy Temperature Sensor is not functioning as expected.
Check the canopy temperature sensor and associated wiring.
Fuel-L Fault
The Fuel Level Sensor is not functioning as expected.
