19
Pairing
i
Note! The following information is intended primarily for your hear-
ing healthcare professional, who in most cases will complete the
tasks that are necessary before the Remote Control 2 can be used
with your hearing instruments. However, the process is designed
to be simple and should be easily accomplished by almost anyone.
Pairing is the process of setting up an exclusive com-
munication between your hearing instruments and your
Remote Control 2. Your hearing healthcare professional can set
up pairing during the fitting of your hearing instruments. Alterna-
tively, you can follow the below steps to pair your hearing instru-
ments to the Remote Control 2:
1. Make sure the Remote Control 2 is fully charged and is turned
ON. Your hearing instruments must be off – open the battery
doors.
2. Press the pairing button on the
Remote Control 2 (11 on page 9)
one time. This will activate the pair-
ing mode which will be active for 20
seconds.
Searching for hear-
ing instruments
400244240-CA_Rev.A KS RC2 ug .indd 19
29-07-2013 11:04:28
Summary of Contents for KS562-DRW
