17
18
Note:
When the OST backup function is enabled, the radio retains
the OST code of each channel even if the channel is changed
or the radio is shut down.
In the OST state, P2
icon will display.
Press
OST
button again to return to normal operation.
11. GPS Information View
If the radio starts the GPS function, you can view the current GPS
information. The specific operating steps go as follows:
A.Press
GPS Information View
button to enter the GPS infor-
-mation display mode.
B.Press / button until the items you require displays.
C.Press button for selection.
D.Press / button for page up of the following content.
E.Press button to return to the previous operation.
The specific content can be shown as follows:
1. Positioning star number:
STAR NUM
2. Longitude
LONGITUD
3. Latitude
LATITUDE
4. Altitude
ALTITUDE
5. Speed
SPEED
6. Time
TIME
If the wired clone function is enabled, the radio will not quit after
entering the wired clone mode. To return to normal user mode, the
user needs to restart the machine.
The operating steps go as follows:
1.Press [P1] and [P2] buttons for power-on until show
CLONE
(for two seconds) and enter the clone mode. If the function is
disabled, it will enter the user mode.
2.Connect the slave radio with the wired clone cable first,and then
turn on .
12. Wired Clone Mode
3.Press the master radio s [P4] for starting clone.During transm-
-itting the data,the master radio lightes red,and the slave radio
lights green.
4.Press the [P4] button and the master will return to the clone
mode. Continuous clone will start from Step 3.
Note: The master displays
success
and the slave auto
matically restart upon successfally receipt of all data.
13. Trouble Shooting Guide
A.The power cable is not connected with the
accumulator or the host reliably. Please
connect the power cable reliably.
B.The protective tube of power cable is burnt
out. Please change it.
C.The power button is of poor contact. Please
change the silica gel button or PCB button.
Number Problem Solution
1 Power on
Failure
