the scan list when pressing the PTT button.
Priority Channel + Currently Working Channel:
When pressing
the PTT button during scanning, the radio will always transmit from
the priority channel. When pressing the PTT button during the
scanning pause, the radio will transmit from the currently working
channel.
Last Called Channel:
When pressing the PTT button, the radio will
transmit from the last channel that received a call.
Last Used + Currently Working Channel:
When pressing the PTT
button during the scanning, the radio will transmit from the last
channel that transmits signals. When pressing the PTT button during
the scanning pause, the radio will transmit from the currently
working channel.
Nuisance Delete
During scanning, if a channel continually generates unwanted noise
or interference, you can press the preprogrammed “Nuisance
Delete” button to remove the channel from the scan list temporarily.
Note:
* The priority channel and the last channel in the scan list cannot be
deleted.
* Quit the scan mode and enter it again, the deleted channel will be
added to the scan list again.
Lone Worker
If lone worker function is enabled by PC software, you can press the
button set as lone worker to start lone working. This mode is to
ensure the safety of the user while using the radio separately. The
lone worker timer starts upon pressing the preprogrammed “Lone
Worker” button. If the preset lone worker time expires, the radio will
make an alert tone. If the preset remind time expires, the radio will
enter Emergency Mode and make alarm.
In the Lone Worker Mode, press the preprogrammed “Lone Worker”
button again to quit Lone Worker Mode.
In the Lone Worker Mode, press the preprogrammed “Lone Worker
Reset” button (if a button is designated as the lone worker timer
reset button) or any button (if any button is designated as the lone
worker timer reset button) to restart the lone worker timer.
Emergency Alarm
Press the preprogrammed “Emergency Alarm” button (the pressing
time should be longer than the debounce time of the emergency
alarm switch) to enter the Emergency Alarm Mode. You can give the
warning tone according to the programming software, or send the
background sound to your partner or the system.
Press the preprogrammed “Emergency Alarm Off” button to quit the
Emergency Alarm Mode, the radio stops the alert and resumes
normal operation.
15
14
