Kirisun DM588-01, User Manual

Page: 55 / 64

DM588 Digital Mobile Radio User Manual
48
Note:
If you press the On/Off key while the radio is sending signaling, the radio will stop
sending signaling and exit.
If the maximum times of retry is reached but no response is received, the radio will
automatically stop sending signaling and exit. A failure message will be prompted.
5.10.2 Receiving Stunning/Activating Signaling
After a target radio receives stunning/activation signaling and enters stunned state,
it will automatically send a respond of acknowledgement.
The stunned radio only displays its channel alias and group alias in the home
interface. It can receive no information except activation signaling, and no
operation but power on/off can be performed.
The activated will return from stunned to normal state after being activated.
5.11 Lone Worker
This function enables the radio to send an emergency alarm if no operation (e.g. a
keystroke) is performed on the radio within a preset response duration. This
function needs to be set using the programming software. This function works as
below.