Kirby Morgan, SuperLite, Band Mask, KMB Band Mask, EXO, SuperMask, SuperFlow, and Rex are all registered trademarks of Kirby Morgan Dive
Systems, Inc. Use of these terms to describe products that are not manufactured by KMDSI is not permitted without written permission from KMDSI.
© Copyright 1970-2016 Kirby Morgan Dive Systems, Inc. All rights reserved. This manual is made available for the express use of owner of this Kirby
Morgan product. No part of this manual may be reproduced, stored in any retrieval system, or transmitted, or used in any form or by any means, whether
graphic, electronic, mechanical, photocopy, or otherwise by technology known or unknown, without the prior written permission of
Kirby Morgan Dive Systems, Inc.
Copyright 2003-2016, Dive Lab® Inc. All rights reserved. InspTrnG 03100
KIRBY MORGAN SUPERLITE DEEP SEA DIVING HELMET
MODEL 17 A/B
SUPERVISORS EQUIPMENT CHECKS PRIOR TO ENTRY INTO
WATER
Appendix A2.4.1
(9-21-2016 SC)
NOTE: This checklist is intended to be used with both KMDSI SuperLite 17A and B.
NOTE: Helmet(s) being used in polluted waters, or extreme environments, will require inspection that is more
frequent.
CAUTION: KMDSI strongly recommends the use of a Tender to assist the diver when “dressing-in”. The Tender
should ensure the Helmet Liner is fastened to the Helmet Shell and the Chinstrap is properly fastened under the
divers chin, once the Helmet is donned. After closing the Yoke/Neck Clamp Assembly, ensure that
the safety pin is installed.
WARNING: These are recommended minimum checks when using Kirby Morgan Helmets or Masks. Additional
checks may be required as dictated by the conditions and tasks being performed. Failure to perform in-water
checks may result in serious injury or death.
CAUTION: All surface supplied diving with Kirby Morgan Helmets must include a fully functional, properly
maintained Emergency Gas System (“EGS”). The EGS should be maintained in accordance with the applicable
Operations and Maintenance Manual(s).
Date:
Helmet Serial #:
Associated Equipment Serial #(s):
Technician (Print Name):
1
