Kirby Morgan Dive Systems, Inc.
®
1430 Jason Way Santa Maria, California 93455
Phone: 805/928-7772 Fax: 805/928-0342
www.KirbyMorgan.com email: [email protected]
KI
RBY
MORGA
N
D
IV
E SYSTEMS, I
nc
.
© MMXXII Kirby Morgan Dive Systems, Inc. All Rights Reserved Document #220323001 Page 3 of 8
3. Ensure that, on both sides of the mask, the neoprene material tucks inside of the leading edge
where the lens body and jaw frame meet.
This will permit proper removal and replacing of the Pod both above and below the water.
4. Stretch the pull tab away from the mask and over the apex of the lower jaw frame. Use the
nylon pocket to capture the apex of the jaw frame.
