Kirby Morgan EXO-26 User Manual Download Page 12

12

 

© ⅯⅯⅩⅡ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 120613002

EXO-26 Balanced Regulator

masks and is used to equalize the divers ears. This device is easily adjustable and 

fits a variety of noses and faces.

9) Balanced Regulator:

The EXO-26 has been supplied with a balanced regulator. This balanced regula-

tor has an adjustment knob for adjusting to a wide range of operating pressures.

1.2 Design Purpose

The Balanced Regulator EXO-26 Full Face Mask may be used with SCUBA gear.

The Balanced Regulator EXO-26 permits nearly normal speech, making the mask 

an excellent choice for use with wireless communications. The mask is also well 

suited for ice diving operations and has been used successfully in the Arctic under 

subzero conditions. It is an ideal mask for light commercial work, for the diving 

scientist, and for search and rescue operations. Many search and rescue teams use 

the EXO-26 for diving in biologically contaminated water.

B

 

CAUTION

Contaminated water diving operations are extremely hazard-

ous. They should NOT be attempted unless all members of the 

dive team have been trained for this type of diving. You must 

check to ensure that every piece of the diver’s equipment is 

compatible with the contamination to be encountered. If there 

is the slightest doubt regarding what contaminants are in the 

water, the diver must NOT dive.

B

 

WARNING

Do not dive this mask in water containing high concentrations 

of petroleum based chemicals. Clean the mask using only 

mild detergent and water.

Summary of Contents for EXO-26




























Reviews: