Page 2 / 8
EN
General
Technical information
•
Marine aluminium heater (AlMg3)
•
Hatch of the furnace with steel interior
•
2 Cast-iron grates
•
1 Solid L-grate
•
Inside the tank above furnace, acid proof steel pipe = heat exchanger
•
Water emptying valve ½” od
•
Water tank refill opening with rubber plug
•
Water level checking pipe
•
Two 1 1/2” female thread connectors for connecting the heater to swimming pool water
circulation system
•
Feet for attaching the heater to the basement
•
Ø149,5 mm female connection for chimney
o
Kirami standard Ø150mm chimney set can be used
•
Power output ~50 kW (Means 42 °C rise of temperature / 1 cubic meter of water / hour)
•
Size: (Diameter x height) 640 x 1010mm
•
Dry weight 55 kg
Operating principles
Heater function is based on heat exchanger. The heater tank is
filled up with clean water and pool water circulates in the heat
exchanger built in the top part of the heater. The exchanger is
built from acid proof steel pipe. This way the chemical rich
water of the pool is kept separate of the clean water in the
heater tank.
Installation
Kirami TUBE XL heater is meant for heating swimming pools with firewood. To be used only
outdoors.
Heater should be positioned as close to the pool as possible and vertically so that the water surface
of the pool is always higher than the heater’s top. This way your heater won’t get empty should the
water pump turn shut down.
The heater has to be attached from its feet to a solid and strongly built base because when the
heater is empty, it may easily fall down in windy weather. Therefore, the base must be so strongly
12
