DE
EN
FR ES
43
www.kipp.com
Tel. +49 7454 793-0
Baseplate on a zero-point clamping system
1x clamping pin form A
for 25 H7 bores, collar height 5 mm,
for M12 cap screw (centring pin)
1x clamping pin form B
for 25 H7 bores, collar height 5 mm,
for M12 cap screw (compensating / bayonet pin)
The clamping pins are screwed into the baseplate using M12 screws.
The centring in the baseplate takes place via 2x Ø25H7 bores, whereby
the clamping pins are positioned with repeat accuracy.
Bottom view of the baseplate with mounted zero point clamping pins.
3 . D E S C R I P T I O N
