9
6. Hardware
Mechanical design of the LOGBOX SD is based on single board design with
minimal dimensions and weight.
Fig.6 Front view
Outer dimensions 115mm (width), 90mm (height) a 50mm (depth) makes it suitable
for mobile applications, too. Connectors inside are located on left and right side,
from the bottom there are inputs for sensor cables. Thanks to clear layout the user
can easily connect relatively large number of sensors. For better access to input
connections, connectors are divided by three. For permanent installation it
is possible to use four screws M4 for fixing, while achieving IP65 class protection.
The mounting plate can be used to connect the LOGBOX SD to a mast of 40 mm
or smaller. Unused cable glands are closed with an inside plug. The user can
mount extra cable glands to support more cable entries.
Fig. 7 Back view
Summary of Contents for LOGBOX SD
Page 1: ...Instruction Manual Datalogger LOGBOX SD...
Page 52: ...52...