Kipp & Zonen LOGBOX SD, Instruction Manual, Page: 29 / 53

29
Sensor start-up delay can be selected in the range from 0 seconds up to 9 seconds.
Memory management (for the internal memory of 128 kB) has the following options:
circular (after the memory is full, the oldest data will be over written) or on-stop
(after all memory is used, new data will no longer be stored in memory, even though
the measurements will be performed).
When using the SD card the logging to
memory should be set to Circular. Otherwise the logging stops after the
(internal) memory is full.
14.6 Sensor configuration. (Digital)
In the Digital window you can select parameters digital inputs.
Digital input, which should be logged must be checked.