-16-
OUTPUT CURRENT: indicating generator current
VOLTAGE: indicating generator voltage
LONG-RANGE CONTROL: indicating long-range control using if or not
RUNNING: indicating electric power exist if or not
OVERLOAD: indicating overload, the generator will self-braking
LOWER OIL PRESSURE: indicating lower oil pressure, the generator will self-
braking
START FAULT: indicating failure start
PROTECTION: indicating voltage & frequency higher (lower), the
generator will self-braking
EMERGENCY STOP: indicating stop generator according to emergency
Measure
-17-
Three-phase current: Indicating generator current.
Single phase power: Indicating generator power.
Generator voltage: Indicating generator voltage.
Generator running: Indicating the existence of electrical power.
Running trouble: Indicating running trouble, check it according to the code map list.
The indication lamp function of Code map list :
P-01 Low oil pressure: Indicating low oil pressure, the generator will self-braking.
P-02 Underfrequency: Indicating frequency higher (lower), the generator will self-
braking.
P-03 Undervoltage: Indicating voltage higher (lower), the generator will self-
braking.
P-04 Generator overload: indicate overload, the generator will self-braking.
P-05 Start trouble: Indicating failure start
P-06 Emergency indicator: Indicating stop generator according to emergency
measure.
P-07 Charging trouble: Charging system trouble.
P-08 Generator overheating: Water temperature of generator is overheated, the
engine will self-braking.
PVC Label (Three-phase)
Summary of Contents for KDE12EA
Page 2: ......
