Kioti RX6010C, Manual, Page: 141 / 218

6
-
3-poInt HItcH ImpLement And LoAdeR opeRAtIon
6
T66O122A
INsTALLINg PTO sHAfT
1. consult your local KIOTI dealer
for selection of the pto shaft.
2. when selecting a pto shaft,
make sure that it is not too short to
come off of the female and male
shafts at the highest position or too
long to impact its female and male
shafts at the lowest position.
3. move the joint back and forth to
check that its lock pin is properly
seated to the groove of the pto
shaft.
(1) pto shaft
H11O682A
11
C56O140A

Make sure that the PTO safety
cover is in its position before
driving the PTO shaft.

The tractor PTO and PTO shaft
should not be interfered by
any surrounding parts.

Never go close to the rotating
PTO or tractor PTO shaft. A se-
vere accident can happen.

Before driving an implement
through the PTO, always make
sure that all bystanders are
well away from the tractor.

when using the PTO drive with
a stationary tractor, always
make sure that the gears are
in neutral and that the parking
brake is applied.
wARNINg
(1) Lock pin
M55-유럽판-06.indd 9 2011-08-11 오후 3:47:47