Kioti RX6010C, Manual, Page: 104 / 218

4
-
2
rx6010c / rx6010pc
For detailed information on installa-
tion, contact your local KIOTI dealer.
A40O4E1A
(1) rear weight
(2) spring washer
(3) nut
(4) bolt
it is possible to inject water and cal-
cium solution into the tire to use it as
a ballast.
if one liter of water is mixed with 0.4
kg of calcium, this liquid does not
freeze down at -49 °F (-45 °c).
For a tire without a tube, fill it with
water and calcium solution at least to
the valve stem level (75%).
If the tire without a tube is not filled
with water and calcium solution suf-
ficiently, a part of the rim is exposed,
resulting in corrosion.
For a tire with a tube, fill it up to 90%
of its level.
ADDITIONAl lIQuID TYPE wEIGhT

If the liquid ballast is used, inflate
the tire 0.14bar (2psi) more than
the specified pressure. this is to
compensate for the ventilation
symptom which occurs while the
tire is moving.

the liquid injection should be
performed only by a qualified
service personnel.
For detailed information, contact
your local KIOTI dealer.
NOTE
NOTE

Attach only required amount
of weight.

unnecessary weight can result
in poor braking performance,
rapid wear of the brake discs,
shortened axle life, and in-
crease in fuel consumption.
IMPORTANT
Max. load
30 kg×2 pieces (132 lbs)
M55-유럽판-04.indd 52 2011-08-11 오전 11:59:04