PP
C
-
6
1
0
1
All-in-One CPU Board Series User’s Manual
Installation
5
C h a p t e r 2
Installation
2.1 Installation
Steps
Follow the steps listed below to install the
PP
C
-
6
1
0
1
in the system.
1. Make sure the power is
OFF
.
2. Set the configuration jumpers according to the jumper settings in
Chapter 3.
3. Connect the I/O cables and peripherals, i.e. floppy disk, hard disk,
monitor, keyboard, power supply and etc. to the CPU board.
NOTE:
The color of pin one is usually red or blue, while others are
gray.
2.2 Peripherals for a Minimum System
The following is a list of typical peripherals required to build a minimum
system:
AT or ATX Power supply
IBM
TM
PS/2 keyboard And Mouse
Display monitor
Floppy or hard disk with MS-DOS or Flash Disk emulator
