Kintec Digital Technology KDS‐0702 Operating Instructions Manual Download Page 5

Page: 5 / 6

2. Insert a USB drive into USB host, and reboot the device. The screen will be shown “update

in process” as below:

3. Remove a USB, once update is completed. Please note that the device will automatically

reboot itself while update is completed. The screen is shown as below:

Firmware upgrading:

1. Format your SD card before copy all updated files to a SD card.

2. Ensure file name is FWUPDATE.IMG.

3. Insert SD card into SD slot and reboot the device. The screen is shown “FW update in

Summary of Contents for KDS‐0702

Page 1: ...sor Operating Instructions Before operating the unit please read this manual thoroughly and retain it for future reference 2011 By Kintecdigital Motion Sensor Speakers SD Card Slot Power USB Port Vesa Hole Volume Control Button Motion sensor switch button Stand LCD ...

Page 5: ...ate is completed Please note that the device will automatically reboot itself while update is completed The screen is shown as below Firmware upgrading 1 Format your SD card before copy all updated files to a SD card 2 Ensure file name is FWUPDATE IMG 3 Insert SD card into SD slot and reboot the device The screen is shown FW update in ...

Page 6: ...lease unplug power otherwise the device will keep upgrading the firmware Do not power off while updating The device may cause a crash while removing power during updating process Different signage models need to map the corresponding signage Firmware Please consult an original manufacturer for firmware upgrade ...