7
17. After the s ystem restarts the Diagnostic Tools icon will appear on the task bar. When the
A300A card is connected to the ADSL data port, both panels of the icon will appear black
signifying an ADSL connection.
18. To begin a dial-up connection, double -click
My Computer,
then double-click
Dial -Up
Networking
.
19. If this is the first dial-up connection created enter an area code (e.g. 408) for your region, then
click
Close.
If this is not your first dial-up, go to step 23.
20. Click
OK
to create a phonebook entry for a first time dial-up connection.
21. Enter a name for the phonebook entry (e.g. MyDialUpServer) and click
Next
.
22. When the
Server
window appears click
Next
.
23. The
Dial -Up Networking
window prompts for the phone number of the dial-up server. Unless
instructed to enter a phone number by the ISP, enter zero “0” Still at the
Dial -Up Networking
window, click
More.
24. The
Edit Phonebook Entry
window appears. Select the
Security
tab and verify that “
Accept
only Microsoft encrypted authentication
” is selected. Click
OK
. The previous
Dial -Up
Networking
window appears, click
Dial
.
25. The
Connect to MyDialUpServer
window appears. Enter the
User name,
Password
and
Domain
, then click
OK
.
NOTE:
Refer to you ADSL Worksheet for this information or contact your ISP provider.
NOTE:
The text “
Verifying username and password…
” will be displayed while logon
authentication takes place.
NOTE
: If this screen persists and a connection logon error is reported, confirm that the
correct Username and Password are entered and try the connection again. Also verify that
the connection address is correct.
26. This window is displayed at the completion of a successful Dial-Up logon. Choose a display
behavior and click
OK
to close.
NOTE
: The default installation ADSL mode is
ANSI T1.413 Issue 2
or
ANSI
. If your ISP is
providing a different mode then you need to change the setting
27. On the right-hand side of the task bar, right click on the
Diagnostic Tools
icon. Then select
Configuration
.
28. The
Configuration
window appears. Select the
ADSL Mode
option and then select the ADSL
mode type provided by your ISP. The service mode type will be one of the following:
q
ITU G.992.1 Annex A (G.dmt) ....................referred to as
G.dmt
q
ITU G.992.2 Annex A/B (G.lite)..................referred to as
G.lite
q
ANSI T1.413 Issue 2.......................................referred to as
ANSI
29. After you select and
check
your ISP’s
service mode, click
Set
.
Congratulations, you are done. Your A300A
the Internet is established!
