Kinpo A300A Installation Manual Download Page 3

Page: 3 / 28

SYSTEM REQUIRMENTS

Make sure your PC system meets

ALL

of the following minimum hardware and software

requirements:

Hardware:

IBM PC/AT or compatible

Pentium 100Mhz or faster

30Mbytes available hard disk space or more

2x CD-ROM drive or better

32Mbyte available system memory or more

Software:

Your Operating System must be one of the following:

Microsoft Windows 95.x – 95A, 95B

Microsoft Windows 98.x – 98, 98A

Microsoft NT – NT 4.0 Service Pack 3

BEFORE INSTALLATION

If you are installing PPPoA service for Win95A, 95B or Bridged Ethernet service for Win95A,

you need to upgrade your Dial-Up Networking (DUN) application to version 1.3 or above. Please
refer to

Appendix A

on how to upgrade your system’s DUN.

HARDWARE INSTALLATION

WARNING!

To avoid possible damage to your A300A card you need to use an anti-static

grounding device or hold onto the metal chassis of the PC to provide anti-static grounding.

Shut down the system and switch the power

off

Unplug the AC power cable from the PC.

Remove the cover from the PC chassis.

Unscrew the “slot cover bracket” from an unused PCI slot.

Insert the card into an empty PCI slot.

Firmly press the A300A card into the slot and secure the card
to the chassis with the chassis bracket screw.

Connect one end of a phone cable to the RJ-11 port on the A300A
card and plug the other end of the cable into the ADSL data
service.

Plug the power cable back into the PC system.

Power-up the PC and proceed to software installation.

SOFTWARE INSTALLATION AND SERVICE CONFIGURATION

NOTE:

You may need the Microsoft Windows Operating System installation files (CAB files) to

complete the installation. The CAB files are contained in the Microsoft’s system CD. Some
systems may have already installed the CAB files to the hard drive, but you should have the
Microsoft CD handy just in case.

TO INSTALL POINT TO POINT PROTOCOL OVER ATM SERVICE

Win95A

go to page 2

Win95B

go to page 3

Win98, 98A

go to page 4

NT 4.0

go to page 6

TO INSTALL BRIDGED ETHERNET PROTOCOL OVER ATM SERVICE

Win95A

go to page 11

Win95B

go to page 12

Win98, 98A

go to page 13

NT 4.0

go to page 15

Summary of Contents for A300A





























Search results

Summary of Contents for A300A

Reviews:

Related manuals for A300A

Brands by name

Popular brands

Kinpo A300A, Installation Manual

Search results

Summary of Contents for A300A

Reviews:

Related manuals for A300A

Brands by name

Popular brands