JACO - Installation Guide
11 |
P a g e
1)
Insert the rail adapter (MF 7519 0001) in the square extrusion (MF 4040 0001) as defined in
the following figure;
2)
Place the appropriate quantity of square spacer (MF 7515 0004 - if needed) on the square
extrusion with bolt holes aligned;
3)
Place main bracket (MF 8010 0002) on the square spacer. The bolt row chosen will define
the final height of the JACO arm. Chose the appropriate length of screws (M6) and lubricate
the threads with the prescribed oil. Insert the screws in the holes and fasten them to the rail
adapter inserted in the square extrusion with the required torque.
4)
Place the appropriate spacer (quantity and type) on the main bracket upper side.
5)
Reverse the assembly and insert the adequate screws (type and length) and Nord-Lock in
the appropriate holes. The following figure shows the installation of a spacer for tubular
adapter (left) and rail adapter (right):
Figure 11 - Bracket system assembly (part II)
Summary of Contents for Jaco Rehab Edition
Page 1: ...Installation guide V1 0 9 ...