KINKI STUDIO
03
4. Connections
Connect the power cord to the IEC inlet of the amplifier and plug it into the power plug socket.
For safety reasons, a 3-wire grounding (earth) plug must be used, whenever possible.
In order to get the best sound from the amplifier, avoid using any multiple plugs socket or
extension cords.
The signal input connections are located at the center of the rear panel with indication of
“LEFT IN”
and
“RIGHT IN”
respectively.
You may use either RCA or XLR connection to source devices. The XLR Pinout is as follow:
- Pin 1 (Shield)
- Pin 2 (Hot)
- Pin 3 (Cold)
Note
: The same set of inputs pair should be connected. For example, LEFT IN uses CH1, and
RIGHT IN must also use CH1.
