KINKI STUDIO
04
5. Control
Power Up
The power inlet IEC of the EX-P27 is located at the rear panel. After the power is supplied to the
amplifier, it will be in
Operational
state.
Press the front panel power button underneath once. The display indicator light flashes signify a
Start Up
sequence. The input signal source (CH1-4) and volume display appear once the amplifier
is started in
Operational
state.
Under normal working conditions, press and hold the power button underneath the front panel for
five seconds, then release it, the amplifier will go into
Standby
. The indicator in the lower right
corner lights up.
Volume adjustment
Rotate the front panel right knob (VOLUME) to adjust the volume, to reduce volume, turn left; to
increase volume, turn right. Each step is in logarithm increment, there are total 95 steps.
