5) Pairing headsets with Multi-devices via Bluetooth
The headset can connect with two Bluetooth devices at most. If you want to
finish the multi-pairing, please refer to the following steps:
1)
Firstly, pair and connect the headset with Bluetooth device one (refer to
“pairing the headset with a Bluetooth cell phone);
2)
Long press
button and make it enter paring mode again, pair and
connect with Bluetooth device two(refer to “pairing the headset with a
Bluetooth cell phone);
3)
Operate Bluetooth device one to connect with headset. The headset has
already connected with Bluetooth device one and two, the headset also
can connect with these two devices automatically after turn on next time.
Remarks:
The steps of turn on/off the multi-pair function as follows:
Turn off multi-pair function
: the headset in standby mode, not connect
with device, press MFB and volume down button for 4 seconds
simultaneously and release it until hear a prompt tone.
Turn on multi-pair function
: the headset in standby mode, not connect
with device, press MFB and volume up button for 4 seconds
simultaneously and release it until hear a prompt tone.
To improve the stabilization of headset, we suggest you turn off the
multi-pair function when you only connect with one cell phone.
3. Battery display
When the headset connected with IOS device, it will display the battery of
the headset on the device. When the headset is in low battery, power symbol
show red, it emits you to charge for your headset.
6
