Kingwon RX-1004, User Manual

Page: 7 / 13

09 10
INSTALLATION INSTRUCTIONS
TX: 1003
1 . Install four 5dBi antennas on the transmitter
2 . Connect transmitter to 12V Power-supply and turn on the power button,
OLED screen lighted up, the Signal and Frequency icons display,
Finished Starting-up )
4 . Audio input, transmitter 1003 connected to the microphone,
(MODE key press 3S can switch the internal and external sound).
Note: When transmitter 1003 SDI output, the SDI output can only be used
if SDI under loop output.
12V power supply
Camera
SDI loop output
SDI cable connect
SDI monitor
HDMI
HDMI Cable
POO3
HD Player
HDMI
Connect the microphone
install antennas
4. For Transmitter inputs, either HDMI or SDI works, when the input is
SDI source, the SDI loop output(for local monitoring) is enabled."VIDEO"
icon will and only will display in OLED when a video input is properly
connected.