Kingwon RX-1004, User Manual

Page: 12 / 13

19 20
NOTICES DESCRIPTION
1. Please do not plug or unplug the HDMI cables on transmitter&
receiver when the transmission kit are powered on during normally
using transmission kits.
2. Please connect the transmitter with video source and the receiver with
monitor/TV via HDMI cables before power on the transmission kit.
3. Please power off and reset the transmission kit when OSD indicates
Pairing Failed. If still failed to connect after reset, please redo pairing.
4. Please remove and replug the HDMI cable on receiver/transmitter
when failed to get video output(black screen) after changing video
source resolution. If still failed to obtain video after this operation,
please power off and reset the transmission kits.
5. Please power off and reset the kits if failed to connect for minutes
after frequency channel switched.
6. Please replug the HDMI and check TV/Monitor is working or standby
when transmission kits connected normally but failed to output right
video. If failed to output after this operation, please try to change the
display device.
7. Please switch frequency channel to avoid the jamming frequency
when presented image lag or mosaic, because this might be arisen by
frequency jamming. Switching Frequency operation, please refer to
the instruction of frequency switching in this manual.