6
3.1.2 Time monitoring
The vehicle GPS terminal can be set to upload the position and status information of
the vehicle to the backend at a certain time or a certain period or at a certain time
interval.
3.1.3 Blind spot compensation
When the terminal enters the GPRS blind zone, the track data will be saved at the
shortest 15S interval, and the blind zone data will be uploaded to the backend when
the GPRS is back online. The blind zone compensation data can be saved up to 4000.
3.1.4 Cornering Compensation
When the vehicle enters the curve lane, the terminal detects that the driving
direction has a certain angular deviation (default 20 degrees), and a timing feedback
message is added to ensure that the driving track is more accurate.
3.1.5 LBS
The terminal uses GPS positioning by default. When the GPS enters the blind zone
and cannot be accurately located, the terminal automatically switches to the base
station location. The terminal acquires the base station information every 30S and
uploads the base station information, the server interprets the specific location.
3.1.6 Main power detection
The terminal detects the main power voltage in real time. When the battery voltage
on the vehicle is too low, the vehicle terminal reports a low voltage alarm to the
monitoring center.
3.1.7 Over speed alarm
When the vehicle speed is higher than the over speed alarm value, the
vehicle-mounted terminal will notify the monitoring center.
Summary of Contents for MT36
Page 1: ... MT36 User manual ...
