www.kingwin.com
Hardware Installation Guide
1. Unscrew the 4 screws from the back, then pull
out the rear panel and tray.
1
2. Place the first HDD into the bottom tray. Push
the HDD to connect the SATA connector.
3. Place the second HDD into the top tray. Push
the HDD to connect the SATA connector.
Note: Make sure all connectors are connected well.
2
4. Screw the HDD on the tray from both sides.
5. Push the tray into the aluminum case. Screw
in the rear panel and enclosure together.
3
DK-32U-S
User’s Manual
