Kingtel KT52IP, User Manual

Page: 63 / 81

Plug and Play(pnp) Settings
Enable PnP If this is enabled, the phone will send SIP SUBSCRIBE messages to
a multicast address when it boots up. Any SIP server understanding
that message will reply with a SIP NOTIFY message containing the
Auto Provisioning Server URL where the phones can request their
configuration.
PnP Server PnP Server Address
PnP Port PnP Server Port
PnP Transport PnP Transfer protocol – UDP or TCP
PnP Interval Interval time for querying PnP server. Default is 1 hour.
Phone Flash Settings
Server Address Set FTP/TFTP/HTTP server IP address for auto update. The address
can be an IP address or Domain name with subdirectory.
Protocol Type Specify the Protocol type FTP, TFTP or HTTP.
Config File Name Specify configuration file name. The phone will use its MAC ID
as the config file name if this is blank.
Update Interval Specify the update interval time. Default is 1 hour.
Update Mode 1. Disable – no update
2. Update after reboot – update only after reboot.
3. Update at time interval – update at periodic update interval
TR069 Settings
Enable TR069 Enable/Disable TR069 configuration