5
Listening to Music Wirelessly in Stereo pairing mode
Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the
Bluetooth Earpods to stream music wirelessly. Once it is paired, play music from your device.
Function
Operation
Button
Pause
Playing music
Short press the MF button of one Earpod will pause the
music
Play
Pausing
Short press the MF button of one Earpod will resume the
music
Note:
Other functions including volume increase/decrease and previous/next track, you may
need to control through your source device.
Pairing either one Bluetooth Earpod with Bluetooth devices (phone or tablet that
support call
‐
answering)
Take out one Earpod from the Charging Case, it will turn on automatically and the
LED flashes red and blue (Or, if the Earpod is not stored inside the Charging Case,
press and hold the MF button of the Earpod for 2 seconds to turn ON. An indication
tone will be heard and the LED flashes red and blue.)
Place the Bluetooth Earpod and Bluetooth device (phone or tablet that support call
answering) no further than 3 feet apart from each other;
Activate the Bluetooth function on your mobile device. Please refer to the
manufacturer’s instructions for instructions on enabling Bluetooth on your device.
Once you have activated Bluetooth on your mobile device, select the “
SL PRO
‐
BUDS
”
from the list of available Bluetooth devices.
If required, enter the password ‘0000’ to confirm & finalize pairing.
Once paired successfully, another indication tone will be heard and the LED will flash
blue slowly.
You can now start to use the Earpod.
If pairing is unsuccessful, turn off the device first and then re
‐
pair following the
above steps.
Once you have paired the Bluetooth Earpod with a mobile device, the Earpod will
remember this mobile device and will pair automatically when its Bluetooth is
activated within the range, during subsequently pairing. You do not need to re
‐
pair
any previously connected devices.
The Bluetooth Earpod will attempt to automatically connect to the last device it was
paired with when switched on. If you want to pair it with a new device, please follow
the steps outlined above.
Making a call with the Bluetooth Earpod in Bluetooth mode
