Kingston Technology MobileLite Wireless G2, Setup Manual

Page: 6 / 103

6
F G H I E D C A B
A. USB 2.0 Port – Allows you to connect an external USB
Storage Device to MobileLite Wireless G2. It also allows
you to charge your mobile device.
B. SD Slot – Allows you to connect a memory card (SD/
SDHC/SDXC or any microSD w/ adapter) to MobileLite
Wireless G2.
C. Battery LED/Power* – Indicates current battery status
and current power state.
D. Wi-Fi LED – Indicates current status of Wi-Fi broadcast.
E. Bridged LED
– Indicates whether or not MobileLite
Wireless G2 is bridged to an Internet gateway via Wi-Fi
or Ethernet.
F. Power Button – Powers on or powers off the MobileLite
Wireless G2 device. Short press (1 Second): Smartphone
Charger/Long press (3 seconds): Storage,
Streaming & Wi-Fi Features.
G. Reset Button
– Allows you to reset the MobileLite Wireless
G2 device back to its original (default) configuration.
Hold button down for more than 10 seconds.
H. Micro-B USB Port
– Allows you to charge MobileLite
Wireless G2 or connect it to a standard USB port on your
computer for fast, easy data transfer. Each media expansion
port will require its own drive letter if media is inserted.
I. Ethernet port – Allows you to connect an Ethernet cable
to create a hotspot for wireless Internet access. Wi-Fi mode
will temporarily disable while connected to Ethernet.
Getting to Know MobileLite Wireless G2
* The battery LED also indicates how much battery time is left while the MobileLite Wireless G2 is powered on. Green indicates 51%–100% battery charge
remaining; orange indicates 25%–50% battery charge remaining; and red indicates less than 25% battery charge remaining.