Kingston Technology DataTraveler Locker+ Generation 3 DTLPG3, Installation Manual

Page: 7 / 1623

Document No. 480G3001-001.A00 DataTraveler
®
G3 Page 6 of 22
3. Create a password to protect your data on the DTL+ G3. Enter it in the
‘
Password
’ field,
then re-
enter it in the ‘
Password Confirmation
’ field, as seen below in
Figure 3.3
. The
password you create must meet the following criteria before the initialization process will
allow you to continue:
1. Passwords must contain 6 characters or more (up to 16 characters.)
2. Passwords must contain three (3) of the following criteria options:
- UPPER CASE, lower case, numeric, and/or special characters (!, $, etc.)
You may also enter a password hint, but it is not a mandatory field. The hint field can be
useful in providing a clue as to what the password is, should the password ever be
forgotten. (
Note: The hint CANNOT be an exact match to the password. )
Figure 3.3
– Password Setup