Kingston Technology DataTraveler Locker+ G3, Installation Manual

Page: 20 / 313

Document No. 480G3001-001.A04 DataTraveler
®
G3 USB-to-Cloud Page 19 of 24
Device Usage (Mac Environment)
Once the DTL+ G3 has been initialized, you
can access the secure data partition and utilize
the device options by logging into the device
with your password. To do so, follow these
steps:
1. Insert the DTL+ G3 into a USB port.
2. Double-click the DTL+ G3 volume icon
3. Open the Mac folder and double-click the
DTLplus_Launcher app.
4. Enter your password in the Login window
textbox (see
Figure 8.1
.)
5. Once you’ve typed your password, click the
‘ Login ’ button to continue.
•
If the correct password is entered, the
DTL+ G3 will unlock and you can begin
using the device.
•
If an incorrect password is entered, an
error message will appear just below the
‘Hint’ field, indicating a login failure (see
Figure 8.2 .)
Figure 8.1 – Login Window
During the login process, if a bad password is
entered, you will be given another opportunity
to enter the correct password; however, there
is a built-in security feature that tracks the
number of failed login attempts*. If this number
reaches the pre-configured value of 10 failed
attempts, the DTL+ G3 will lock and require a
device format of the secure data partition prior
to next use.
THIS MEANS THAT ALL DATA STORED
ON THE DTL+ G3 WILL BE LOST.
For more details on this feature, see
‘
Device Lockout ’ on page 22.
Figure 8.2 – Login Failure
*Note: Once you authenticate to the device successfully, the failed login counter will reset.