Kingston Technology DataTraveler Locker+ G3, Installation Manual

Page: 17 / 313

Document No. 480G3001-001.A04 DataTraveler
®
G3 USB-to-Cloud Page 16 of 24
3. Create a password to protect your data on the DTL+ G3. Enter it in the ‘ Password ’ field, then re-
enter it in the ‘ Password Confirmation ’ field, as seen below in Figure 7.3 . The password you create
must meet the following criteria before the initialization process will allow you to continue:
1. Passwords must contain 6 characters or more (up to 16 characters.)
2. Passwords must contain three (3) of the following criteria options:
- UPPER CASE, lower case, numeric, and/or special characters (!, $, etc.)
You may also enter a password hint, but it is not a mandatory field. The hint field can be useful in
providing a clue as to what the password is, should the password ever be forgotten. (
Note: The hint
CANNOT be an exact match to the password. )
Figure 7.3 – Password Setup