Kingston Technology DataTraveler 4000, User Manual

Page: 5 / 28

Document No. 48000127-001.A04 DataTraveler
®
4000 Page 4 of 28
1. Insert the DT4000 into an available USB port on
your notebook or desktop and wait for Windows
to detect it.
• Windows XP users will receive a ‘ Found New
Hardware ’ notification as seen in
Figure 2.1
.
•
Windows Vista/7 users will receive a device
driver notification as seen in
Figure 2.2
.
Once the new hardware detection is complete,
Windows will prompt you to begin the initialisation
process.
• Windows XP users can skip step 2 and go to
page 5 – Device initialisation .
•
Windows Vista/7 users will see an AutoPlay
window similar to the one in
Figure 2.3
.
2. Select the option ‘
Run DT4000_Launcher.exe
’.
If Windows does not AutoPlay, simply browse to the
CD-ROM partition (
Figure 2.4
) and manually execute
the DT4000_Launcher program. This will also start
the initialisation process.
Figure 2.4 – DT4000 contents
Figure 2.1 – Found New Hardware
(Windows XP)
Figure 2.2 – Device driver installation
(Windows Vista/7)
Figure 2.3 – AutoPlay window
(Windows Vista/7)
(
Note: Menu options in the AutoPlay
window may vary depending on what
programs are currently installed on
your computer
. AutoRun will start the
initialisation process automatically.
)
Device initialisation (Windows environment)
1. Select your language preference from the drop-down menu and click ‘ Next ’ (
Figure 3.1
).