2. Safety precautions
6
Installation
Note: This installation procedure is for guidance only, and its suitability should be verified by the installer.
The following safety precautions are strongly recommended:
·
Before attempting to install and operate the unit, read the instruction and installation manual
carefully.
·
Installation and any maintenance should only be carried out by suitably qualified personnel.
·
It is recommended that the unit be connected to the mains supply via a suitably rated isolating switch.
Warning! When the unit is connected to the mains supply and the cover is open, the circuits at
mains voltage will be exposed. Therefore when installing the unit, ensure all required connections
(including battery connected, if included), are made and covers replaced before turning on the
mains supply. Ensure that all the connections made are secure. If any maintenance work e.g.
installing a new battery, is required ensure that the unit is isolated from the mains supply before
removing the cover. Never leave the unit unattended if the cover has been removed and the mains
supply is connected.
·
Do not exceed unit ratings as shown on the ratings label.
·
It is advisable to route mains cables away from low voltage or sensor cables.
Note: For viewing comfort, the unit should be positioned at eye level. The ideal operating temperature
of the unit is (0
o
C to +40
o
C). It is always good practice to keep electronic equipment away from cold,
heat and electrical plant, as extremes of temperature may reduce the lifetime of the device, and
heavy electrical loads, switches, relays or contactors too close to the device may cause electrical
and electro-magnetic interference when switched on or off.
TMS300 CS Multi-Tank – User Manual
