!
CAUTION
: Be sure to turn off the power switch before
connecting or disconnecting the soldering iron.
Failure to do so may result in damage to the
soldering station.
B. Connections
1.
Connect the cord assembly
to receptacle.
2.
Place the soldering iron in
the iron holder.
3.
Plug the power cord into a
power supply .Be sure to
ground the unit.
4.
Turn the power switch on.
The temperature is preset at
300 ℃ or 350 ℃ at
the
factory.
The heater lamp flickers
when the temperature has
stabilized.
5.
Press the * button to display
the preset temperature. It
will be displayed for two
seconds.
c. Setting the Temperature
Set Temperature Normally.
!
CAUTION
: Make sure the temperature of the station can be
adjusted (password is OK or the password is
initial).While setting the temperature normally,the
heating element is off.
If the “*” button is pressed for less than one second, the present
temperature setting will be shown for two seconds and then the
display
will return to showing the tip temperature.
