Temperature rising and heat recovery curve
TIP:2.4D
60W Soldering Station
TEST CONDITIONS
PCB: Copper Plate
Soldering Point: 1.6Ｘø5mm
Period: Solder every 3 Seconds
ILLUSTRATION
A: Room temperature
B: Time of temperature rising
C: Temperature drop
D: Working time
E: Heat recovery time
Sleeping
If sleeping and working mode are selected, and the soldering iron is
not used for 20 minutes, the power to the heating element will be
decreased, and the display shows
.
This state is sleeping
mode. When the station is in sleeping mode, the tip temperature will
decrease to 200
℃
(if the set temperature is more than or equal to
200℃) or 50℃ (if the set temperature is less than 200℃) and remain
the temperature until resuming the station.
To resume soldering, there are several ways as follows:
1.
Cycle the power switch OFF, then ON.
2.
Hit any button.
3.
Take up the iron-handpiece.
If the soldering station is not resumed more than 40 minutes after it
comes to sleep, the power supply will be shut off automatically, and
the display window will not show anything.
