1. Mode instructions
2. Instructions of the standby mode control
3. Instructions of manual mode control (primary mode)
09
10
Standby Mode
Light of the Standby mode is on;
Motor and sensor stop responding.
Manual Mode
Light of the manual mode is on;
Control the speed through the remote
control or APP.
Automatic Mode
Light of the automatic mode is on;
Speed is automatically controlled by
intelligent algorithm.
It follows the speed of walking.
The motor and sensor stop responding in this mode to
prevent nonusers from accidentally triggering the
WalkingPad.
In this mode, the speed of the WalkingPad can be controlled by the remote control. It is recom-
mended that beginners use the manual mode first and then use the automatic mode after being
skilled in using the WalkingPad. The manual mode is controlled by remote control by default, that
is, the START/STOP button of the remote control is used to start or stop the WalkingPad, which
can be modified in the client "Personalized".
Mode Switch
Short press: return to the previous mode.
Standby Mode
Manual Mode
MODE SWITCH
Short press: switch to automatic mode.
Long press: switch to
S
tandby mode.
ACCELERATION
Short press: increase speed by 0.25 mi/hr.
START/STOP
Short press:
S
tart or
S
top the WalkingPad.
DECELERATION
Short press: reduce speed by 0.25 mi/hr.
4. Learn to Use WalkingPad
In the manual mode,
set as the intelligent
start and stop, the
WalkingPad will start
automatically to the
target speed (default is
1.7 mi/hr ) while
entering this area.
