04. Learn to Use the Treadmill
11
12
Automatic
4. Automatic Control Mode Description(progressive mode)
Entering this area under
automatic mode will start
or speed up the walking
belt
Entering this area in
automatic mode, the
treadmill will slow down
automatically
This mode is an progressive mode, which is difficult to control
and can be used completely without the remote control. It is
advised to use the mode after proficiency.
Use the remote control to start and stop, and the mode switch
button is effective under this mode.
Note: The automatic control mode can only available under
walking mode.
5. Remote Control Paring Instructions
7. Fault Caution Light
6. Connection Caution Light
If the remote control does not respond or you have replaced the
remote control, you need to re-pair.
Pairing method: Restart the machine and press the mode button
on the remote control for 5 seconds.
Not connected to APP
：
Flicker
Connected to APP
：
Off
E01: Software overcurrent
E02: Hardware overcurrent
E03: IPM Module Overheating
E04: Low-voltage Protection
E05: Overvoltage Protection
E06: Motor phase loss protection
E07: Motor block rotation protection
The patents involved in Kingsmith WalkingPad Treadmill
series products are made by Beijing Kingsmith Technology
Co., Ltd. and owned by the Company. No organization or
individual may copy, distribute all or any part of this manual
without Kingsmith’s written permission, and may not use
these patents without authorization.
When printing this manual, we have put various functional
descriptions and instructions in it as far as possible.
However, due to the continuous improvement of product
functions and design changes, there may still be discrep-
ancies with the products you purchased. Due to product
update, this manual may deviate from the actual product in
terms of color, appearance, etc. Please refer to the actual
product.
05. Trademark and Legal Notice
E08: Sensor fault
E09: Motor unable to start
E12: Motor overcurrent
protection
E13: Overloading protection
E14: Hall signal loss
E15: Communication fault
