20
LOGF10 PLACEMENT FOR ZVF24
WARNING
The positioning of the logs is critical for the safe
and clean operation of this heater. Sooting and other
problems can occur if the logs are not properly and
firmly positioned in the heater. Never add additional
logs or embellishments such as pine cones, vermiculite,
volcanic rock or rock wool to the heater.
Log Attachment Points
Log components
1.
Place log #1 against the back wall of the unit. Center
log as shown. Do not place log over the burner posts.
2.
Locate the two notched areas of Log #2 and line them
up with the two grate bars as shown.
3.
Locate the two guide holes at the bottom of Log #3 and
place them on Tabs 1 & 2. Add decorative rock to the
bottom of firebox. Do not put rock on burner assembly.
Warning:
Failure to position parts in accordance with these diagrams or failure to use only part specifically
approved with this heater may result in property damages or personal injury.
Summary of Contents for ZVFB2410MVN
