30
BURNER REMOVAL AND REPLACEMENT
1. Turn OFF the Gas and Electric Power before
servicing the Fireplace.
2. Remove doors. Remove end, back or side
bricks, this depends on type of Fireplace
installation. Remove all Crushed Rock and
Glowing Embers. Vacuum inside of Fireplace
for remaining dust particles. FIGURE 1.
3. Lift and remove Burner Deflectors from Burner.
Slide Burner away from back of Fireplace until
it clears orifice. Lift and remove Burner.
DO NOT force up or sideways, as this may
damage Venturi. FIGURE 2.
4. To replace, reverse procedure.
VALVE REMOVAL AND REPLACEMENT
1. To remove Valve first follow Burner instructions.
2. Remove GAS line and Deflector Pan.
3. To remove Valve Pan, first remove self tapping
screws, then using a knife slide it between Pan
and Firebox bottom. This will separate the High
Heat Silicone bond. Carefully remove Pan and
Valve from Fireplace. FIGURE 3.
4. To replace, first clean any Silicone from Firebox
bottom. Reapply Fresh HIGH HEAT SILICONE
as in Figure 3 and reverse all procedures.
Burner and Valve Removal Instructions
for Models MDV31/39
Summary of Contents for MDV30
Page 19: ...17...
Page 41: ...39 For Models MDV31 39 Replacement Parts continued...