12
Installation Instructions for LOGC200
Locating Tabs
Remove can of touchup paint from firebox
Log and Ember Chunk Kit
Step 1: Locate the locating tabs 1A–1B and position the
holes on the bottom of Log 1 onto the tabs.
Step 2: Locate the locating tab 2A and position the hole on
the bottom of Log 2 onto the tab, position the long
branch of Log 2 onto notched area of Log 1.
Step 3: Place Log 3 into position as shown in picture and
slide Log 3 forward up to the locating tabs 3A–3B.
Do not place log on top of tabs.
Step 4: Place Log 4 onto notched areas of Logs 1–3.
Step 5: Place Log 5 up against 2nd Grate Bar from the left
and rest Log 4 onto notched area of Log 1.
Step 6: Place Glowing Ember Chunks onto front Burner
Tube and slotted Ember Plate. Do not place
Chunks on rear Burner Tube.
❶
❷
❸
❹
❺
❻
Notch
Notch
Notch
Notch
2A
3A
3B
1A
1B
2nd Grate Bar
❶
❷
❸
❹
❺
❻
❻
❻
