Kingsman FDV200, Installation Instructions Manual

Page: 12 / 35

12
Installation Instructions for LOGC200
Locating Tabs
Remove can of touchup paint from firebox
Log and Ember Chunk Kit
Step 1: Locate the locating tabs 1A–1B and position
the holes on the bottom of Log 1 onto the
tabs.
Step 2: Locate the locating tab 2A and position the
hole on the bottom of Log 2 onto the tab,
position the long branch of Log 2 onto
notched area of Log 1.
Step 3: Place Log 3 into position as shown in
picture and slide Log 3 forward up to the
locating tabs 3A–3B. Do not place log on
top of tabs.
Step 4: Place Log 4 onto notched areas of Logs
1–3.
Step 5: Place Log 5 up against 2nd Grate Bar from
the left and rest Log 4 onto notched area of
Log 1.
Step 6: Place Glowing Ember Chunks onto front
Burner Tube and slotted Ember Plate. Do
not place Chunks on rear Burner Tube.
❶
❷
❸
❹
❺
❻
Notch
Notch
Notch
Notch
2A
3A
3B
1A 1B
2nd Grate Bar
❶
❷
❸
❹
❺
❻
❻
❻
WARNING:
Failure to position
the parts in
accordance with
these diagrams or
failure to use only
parts specifically
approved with this
appliance may
result in property
damage or
personal injury.
12