ZCV36S1BL
ZCV3622 Surround Installation
This surround will cover the gap between the fireplace face
and the drywall edges.
Face of Fireplace must be flush with drywall.
Install
Fireplace with framing 1/2” behind face of Fireplace (See
Nailing Tab Guide Section).
Step 3 (illustrated): Install screws in top corners.
Step 4:
Open Lower Panel and install screws through surround.
Raise Lower Panel and replace screws.
Step 2:
Slide surround over fireplace frame.
Step 1:
Remove [2] top screws in
Lower Panel and open.
Step 3:
Install DT screws through
surround into top corners.
Install screws into bottom
corners through surround.
ZCV36S1BL Surround
Parts List:
- [Qty-1] Surround Frame
- [Qty-4] #6 Self Tapping Screws
ZCV36S1BL Surround
ZCV36S1BL Surround
18
Summary of Contents for ZCV3622LP
