Kingsman Fireplaces FP2085 Manual Download Page 11

Gas Conversion for FP2085T and FP2785T Fire Pits 

NOTE: CONVERSION SHOULD BE COMPLETED BEFORE FIRE PIT IS INSTALLED. 

Caution- the gas supply shall be shut off before proceeding with the conversion. 

 

 

TO CONVERT PROPANE (MAP) SYSTEMS TO NATURAL GAS: 

1.  Remove [2] screws from Orifice Retainer Bracket. 
2.  Remove Burner Orifice from Air Shutter. Using a 1/2” wrench, 

disconnect Burner Orifice from brass fitting and replace with 

supplied 

#15

 NG Burner Orifice. 

3.  Set Air Shutter Adjustment to 

1/4”

4.  Re-insert new Burner Orifice into Air Shutter.  
5.  Re-attach Orifice Retainer Bracket to Burner Tray. 
6.  Disconnect LP Hose and Regulator from Valve Assembly. 

TO CONVERT NATURAL GAS (MAN) SYSTEMS TO PROPANE: 

1.  Remove [2] screws from Orifice Retainer Bracket. 
2.  Remove Burner Orifice from Air Shutter. Using a 1/2” wrench, 

disconnect Burner Orifice from brass fitting and replace with 

supplied 

#38

 LP Burner Orifice. 

3.  Set Air Shutter Adjustment 

Fully Open

4.  Re-insert new Burner Orifice into Air Shutter.  
5.  Re-attach Orifice Retainer Bracket to Burner Tray. 
6.  Connect LP Hose and Regulator to Valve Assembly. 

 

 

 

WARNING 

This conversion kit shall be installed by a qualified service agency in accordance with the 

manufacturer’s instructions and all applicable codes and requirements of the Authority 

Having jurisdiction. If the information on in these instructions is not followed exactly, a fire, 

explosion or production of carbon monoxide may result causing property damage, 

personal injury or loss of life. 

The qualified service agency is responsible for the proper installation of this kit. The 

installation is not proper and complete until the operation of the converted appliance is 

checked as specified in the manufacturer’s instructions supplied with the kit. 

5ft LP Hose & Regulator 

PN: 27FP-900FF 

 

Burner Orifice: 

#15 for Natural Gas 
#38 for Propane 

Air Shutter Adjustment: 

1/4” for Natural Gas 
Fully Open for Propane 

WARNING: 

Failure to position the parts in accordance with these 

diagrams or failure to use only parts specifically approved with 

this appliance may result in property damage or personal injury.

 

Orifice Retainer 

Bracket 

11

Summary of Contents for FP2085





























Reviews: